Pressure washing heavy equipment is an effective way to keep it clean and in good condition. However, using the proper techniques is essential to avoid damaging the equipment. Here are some steps on how to pressure wash heavy equipment:
Choose the suitable pressure washer: Select a pressure washer with enough power to clean heavy equipment. Ideally, it should have a PSI rating of at least 3,000 and a GPM rating of at least 4. It's also essential to choose the right nozzle tip. A 15-degree or 25-degree nozzle tip is best for cleaning heavy equipment.
Prepare the equipment: Inspect the equipment before pressure washing for any damage or lost parts. Remove any debris or loose dirt with a broom or a leaf blower. Cover any electrical components with plastic bags to prevent water damage.
Apply degreaser: Heavy equipment often has grease and oil buildup that can be difficult to remove with water alone. Apply a degreaser to the surface and let it sit for a few minutes. Follow the manufacturer's instructions for dilution and application.
Pressure wash the equipment: Start cleaning from the top and work your way down. Hold the wand at a 45-degree angle and keep it at least two feet from the surface to avoid damaging the paint or other surfaces. Use a sweeping motion to cover the entire surface.
Rinse the equipment: Rinse thoroughly with clean water after pressure washing. Start from the top and work your way down, removing all the degreaser and dirt.
Dry the equipment: Once the equipment is clean, dry it thoroughly with a clean towel or air blower. This helps to prevent rust and corrosion.
In summary, to pressure wash heavy equipment, choose the suitable pressure washer and nozzle tip, prepare the equipment, apply a degreaser, pressure wash, rinse, and dry. Following these steps, you can keep your heavy equipment clean and in good condition.